How To Reset TP Link Deco?: A Complete Guide

Δημοσιευμένα 2026-08-16 14:42:07

236

TP-Link Deco systems provide reliable Wi-Fi coverage for homes. Sometimes your Deco may stop working properly. You may see a Deco offline message in the Deco app. A reset can help resolve connection problems. This guide explains how to reset TP Link Deco safely.

Why Reset TP-Link Deco?

You may need to reset your Deco when:

Deco shows offline in the app.
Wi-Fi connection keeps dropping.
You forgot the Deco administrator details.
You want to use the Deco with a new network.
The device is not responding correctly.
You are preparing to give the Deco to someone else.

How To Reset TP Link Deco

Follow these simple steps:

1. Find the Reset Button

Locate your Deco unit. Look for the small Reset button on the bottom or back of the device. The exact location can vary by model.

2. Keep Deco Powered On

Connect your Deco to power. Wait until the LED shows that the device is ready.

3. Press the Reset Button

Use a pin or similar tool to press the Reset button. Hold it for several seconds.

4. Wait for the Reset

Release the button when the LED changes. The Deco will restart automatically. Wait until the reset process finishes.

5. Set Up Deco Again

Open the TP-Link Deco app. Follow the setup instructions. Create your network again. Connect your devices to the new Wi-Fi network.

What Happens After Resetting?

A factory reset removes your previous network configuration. Wi-Fi settings may also be erased. You will need to configure the Deco again.

If your Deco offline problem continues after resetting, check your modem connection. Also check Ethernet cables. Make sure your internet service is working properly.

Conclusion

Knowing how to reset TP Link Deco can help resolve many network problems. A factory reset is useful when troubleshooting persistent connection issues. Remember to back up important network information before resetting. Reconfigure your Deco system after the reset.